| Media: | Water, Air, Gas, Oil, etc |
|---|---|
| Actuator: | Solenoid |
| Connection Form: | Thread |
| Type: | Direct Acting |
| Material: | Stainless Steel |
| Pressure: | 0 to 1 MPa |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Options for you:
1. Port Size: 3/8'', 1/2'', 3/4'', 1'', 1 1/4'', 1 1/2'', 2''
2. Voltage: 12VDC, 24VDC, 24VAC, 110VAC, 220VAC
3. Diaphragm Material: NBR, EPDM, VITON
| Model | 2S025-06 | 2S025-08 | 2S040-10 |
| Port Size( Inch) | 1/8" | 1/4" | 3/8" |
| Orifice Size( mm) | 2.5 | 2.5 | 4 |
| Material | Stainless Steel | ||
| CV Value | 0.23 | 0.6 | |
| Operation | Direct Acting | ||
| Acting Type | Normally Closed | ||
| Working Medium | Air, Water, Oil, Gas | ||
| Seal | NBR, EPDM, VITON | ||
| Fluid Viscosity | 20 CST below | ||
| Voltage | 12VDC, 24VDC, 24AC, 110VAC, 220VAC | ||
| Operating Temperature | NBR: -5~80ºC; EPDM: -5~120ºC; VITON: -10~150ºC | ||
Question 1: What is a solenoid valve used for?
Answer 1: A solenoid valve is used to open, close, mix, or divert media in an application. They are used in a wide variety of applications.
Question 2: How can you tell if your solenoid is bad?
Answer 2: If the solenoid valve fails to open or close, is partially open, makes a humming noise or has a burned-out coil, you need to troubleshoot the valve solenoids.
Question 3: How do I choose a solenoid valve?
Answer 3: When choosing a solenoid valve, it is important to know your media. Depending upon the media and flow requirement, choose the material, orifice size, temperature, pressure, voltage, response time and certification required for your application.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}